Silkysteps early years forum - planning ideas for play

Silkysteps early years forum - planning ideas for play (http://www.silkysteps.com/forum/index.php)
-   Level 3 Diploma EYE NVQ (http://www.silkysteps.com/forum/forumdisplay.php?f=269)
-   -   How to lay out each unit (http://www.silkysteps.com/forum/showthread.php?t=6063)

wendy_poo 01-22-2009 05:17 PM

How to lay out each unit
 
Hi, have just started ccld3, have not been given any info as to how to lay out my work For example on unit 1 do I use the headings of 301.1, 301.2 etc. Where does the knowledge specification come into it, should this be included in my writing or what, help!It obviously has to be included somewhere cos of the evidence method and evidence reference. Totally confused.

HoneyLita 01-24-2009 06:47 PM

Setting up work
 
Hi there

I had the same problem!! Started my level 3 in December and didn't have a clue. Was shocked the other week when I asked how long I have to do it...6months!! I nearly fell off my chair :banghead:

What I've done is put CCLD Unit... centre at the top and then underneath the title of the unit. I then put each coded question like KD167 back on the left side of the page and then my answer next to it.

I also got told that you need to do some reflective accounts to go with the answers to the questions as evidence. So for example if you see a Child that has been hurt and you write it up on an accident form e.t.c then do a reflective account while its fresh in your memory.

My assesor has told me that I need two folders. One with all my work in and all her observations and then another for me to keep at home with the unit subjects so I can carry on working on it. You never know when they will ask to see your folder! Also dividers!!

Also I didn't know til last week but you need to put your signature at the top of each page of your work and the date.

Your assesor will give you a unit assesment and verification declaration form that will need to go at the beginning of each unit. Its just a form that you both sign and basically your decalring that its all your own work. The internal verifier also checks and signs that it meets all the standards.

Hope this helps, not long been on the course so it's still all new to me. Good luck

Lita

wendy_poo 01-24-2009 11:50 PM

I was beginning to think no one was going to answer, many thanks for your help. It is a bit of a nightmare getting started. Good luck with your course. Wendy

Nikadi 01-25-2009 01:11 AM

Seems like a lot to do! Especially the two folders bit, my future tutor told me to get one huge one (lever arch), but I have no idea whats expected of me until she comes for my enrolment =[ I am trying to find out as much as I possibly can now =]

Thanks for the information (and thanks for asking wendy XD)

HoneyLita 01-26-2009 02:58 PM

Yes it is definitely a lot! My course isn't college based at all so having to do a lot on my own as my assesor is always cancelling. Thank heavens for this website!!! Be stuck without it.
Good luck with it all
Lita x

hannah88 01-26-2009 04:17 PM

Hi I just wanted to share how I layout my work as it seems to get a lot of the criteria ticked off.

In assignments I use the knowledge criteria as titles for each section I write (makes them quite long but ensures you cover everything). I then intergrate performace criteria into any of the knowledge criteria sections in which I have written about what I have done (basically just double title it). It gets the knowledge and the performace criteria all ticked off.
If I need to I sometimes write extra bits for the performance but I usually find that I don't need to.

For Reflective accounts I use the performace criteria as my titles. I then copy and paste relevent knowledge criteria into my assignment and answer the performace based on knowledge criteria giving exapmles of things I've done.

I've had 100% of a unit ticked off in one assignment by doing it this way. I hope this makes sense. Had a bit of trouble explaining myself!

wendy_poo 01-26-2009 07:37 PM

Many thanks for your answers, am trying to get hold of my assessor but may just start and do as you have all advised. Wish me luck, I'm gonna need it.

wishfulsinger01 01-27-2009 01:39 AM

heres the explanation 4 the layout of the NVQ 3 folder....

PORTFOLIO 1
  • get a lever arch file
  • get some dividers, 10 divider pack.
  • make a title page for this folder. decorate it wid borders and stuff and write portfolio 1, NVQ (CCLD) Level 3,Your Name
on the dividers write down:
divider 1: MATRIX SHEET
divider 2:ASSESSOR FEEDBACK



divider 3 :QUESTION + ANSWER-Performance Criteria GAPS

(301.3.2…etc)



divider 4 KNOWLEDGE & EVIDENCE

(KD217….etc)



divider 5:
·ASSESOR OBSERVATIONS
·INSPECTION OF SETTING
·PROFFESIONAL DISCUSSION
·WITNESS TESTIMONY'S & WITNESS STATUS LIST

divider 6REFLECTIVE ACCOUNTS
divider 7 DIVERSE EVIDENCE
divider 7 REFLECTION EVIDENCE

PORTFOLIO 2
Now for the 2nd folder it should be a normal ring binder, make a title page and decorate it as u wish and writeportfolio 2, NVQ (CCLD) Level 3, YOUR NAME.
U need 2 dividers
·UNDERPINNING KNOWLEDGE
·RESEARCH
i hope this helps.

Amily 03-24-2009 08:53 AM

As an assessor - this really depends on your training company how the folders are set up. I build my students portfolios for them - based on a variation of some of the above posts. I do it because then I know that they have been done properly.

ASK!! Your assessor is human - they SHOULD help you. I would!

Tip - ensure you sign and date every page of your work.
If you obtain witness testimonies, ensure that there signature and details are obtained on witness status lists.

Nat89 05-23-2009 02:51 PM

How much to write for eac knowedge questions?
 
Im new to my nvq 3 childcare and getiing a bit stuck on the questions. how much should be written on each question?


All times are GMT +1. The time now is 04:46 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.